RSG 400 Serie Instrucciones De Uso página 3

RSG Full Mask User Manual June 2012aw :Layout 1 12/06/2018 13:39 Page 3
The mask is a CE-marked full face mask (class 2), tested and approved in accordance with EN
136:1998 CL2, and standard thread connection in accordance with EN 148-1. The RSG 400
Series full face mask in combination with the T-Air PAPR is approved according to EN 12942:
2009, class TM3P.
The mask covers the eyes, nose, mouth and chin. The full face mask protects the user's eyes
and respiratory organs against harmful aerosols, fumes and gases.
The mask is produced in 2 material types
Neoprene Rubber is a soft material which is kind to the skin and is suitable for the
majority of working situations in which a half mask is required.
Silicone is kind to the skin, and is a very soft and comfortable material which is only
affected by ageing to an extremely limited degree. Perfect for tasks where there is,
for instance, a risk of adhesion of dyes.
The mask body, which consists of kind-to-the-skin neoprene rubber / silicone, is
constructed with a double sealing border which thus provides an extra safety zone.
The mask is constructed with an inner mask of soft neoprene rubber / silicone, which
is kind to the skin. Two large valves ensure that the inhalation resistance is very small.
The mask is equipped with adjustable straps ("quick release") made from
kind-to-the-skin neoprene rubber / silicone which ensure a rapid, perfect and
comfortable fit.
The mask has a large visor which is resistant to impact and ensures an extensive field
of vision to all sides.
The mask is designed so that the incoming air passes over the visor and prevents it
from misting up. However, in the event of a large temperature difference between the
visor's inner and outer side, it is recommended that an anti-misting agent be used (e.g.,
"Klar-Pilot Fluid Super").
The mask is equipped with a very effective speech membrane made of synthetic film.
GENER L (GB) 2
copyright 2018 ©