RSG 400 Serie Instrucciones De Uso página 5

RSG Full Mask User Manual June 2012aw :Layout 1 12/06/2018 13:39 Page 5
PUTTING ON -
PUTTING ON THE M SK:
.
1
Put the carrying strap around the neck. Loosen
all the straps on the mask and spread them out
completely. Put on the mask with the chin
section first.
2.
The mask should be pulled in towards the face,
and the straps pulled over the head and down
towards the back of the head until the headband
is flat
DJUSTMENT:
Adjust the mask until it sits correctly:
.
Both neck straps should be tightened (pulled
backwards) simultaneously.
B.
Both temple straps should be tightened (pulled
backwards) simultaneously.
C.
If the forehead strap is not flat and tight (for
example, if the head is smaller than average), the
forehead strap should be tightened by pulling it
backwards.
REMOV L:
The neck straps' quick release buckles should be
loosened, the mask pulled down away from the face
and then up over the head (the temple straps can be
loosened in the same manner).
DJUSTING - REMOVING (GB) 4
copyright 2018 ©