WERKU WK500490 Instrucciones Originales página 4

ENG
are damaged Many accidents are caused by
►
poorly maintained airless tools
accessories and tool tips, etc. according to these
instructions and in the manner provided for the
particular type of airless tool, taking into account
the conditions work and work to develop
of the airless tool for applications other than those
intended could result in a dangerous situation
Please check your airless tool serviced by a
►
Werku official repair service using only identical
®
replacement parts
►
the airless tool is maintained.
CHECK THE GOOD CONDITION OF THE
AIRLESS GUN.
Make sure that all the screws in the airless
►
gun are perfectly tightened
possible installed accessories are perfectly fitted in
place.
BEFORE STARTING WORK.
Make sure that the suction airless gun is firmly
►
supported before using
standing beneath you when using the suction
airless gun in high areas.
DURING THE OPERATION.
Do not leave the suction airless gun operating
►
without having it firmly fixed
you are sure you have full control over it
point the suction airless gun at anyone while in
use When operating the suction airless gun will
►
produce vibrations
►
come loose, and possibly cause faults or accidents.
AT FINISH WORKING.
Do not touch the possible accessories installed
►
in the suction airless gun after use
hot and cause burns
with may contain chemicals or toxic components
Avoid inhaling these substances or allowing
►
them to come into contact with your skin
PPE designed to prevent and protect against
incidents of this kind.
DESCRIPTION OF THE PRODUCT.
The airless gun has been designed for the high
►
pressure atomization of liquid coating materials
Refer this plan to familiarize yourself with the
►
airless gun before use.
Use airless tools,
►
►
This will ensure the safety of
Make sure that the
►
Check that no one is
►
Only turn it on when
►
►
The screws may gradually
It may be
►
Some materials worked
►
►
1
2
The use
3
4
1. Tip.
2. Tip guard.
3. Trigger.
4. Trigger guard.
5. Trigger lock.
6. Handle.
7. Material inlet.
USE INSTRUCTIONS .
Before putting the airless gun into operation, it
►
is advisable to read all the indicated instructions
Likewise, accident prevention rules, regulations
►
and guidelines for work centres and current laws and
restrictions must be taken into account
gun must be used only by personnel who have been
Do not
trained adequately in their handling, and only for the
uses for which it has been designed.
USING TRIGGER LOCK.
Always engage the trigger lock when the airless
►
gun is not in use (1)
the trigger lock until it stops (2)
trigger, rotate the trigger lock back (3).
SETUP.
Never attempt to assemble, change, or clean
►
the airless gun, tip or tip guard without first
Use
relieving pressure from the spray system
the pressure relief procedure in the sprayer's
owner's manual
for added protection against injection
that the guard alone will not prevent injection
Never cut off tip guard
►
trigger lock when the airless gun is not in use
Before servicing equipment, consult owner's
►
4
English
►
To lock the trigger, rotate
►
To unlock the
►
Always use a tip safety guard
►
Always engage
►
5
6
7
The airless
Follow
►
Beware
►