Brookstone MAX 2 Manual De Instrucciones página 7

OPERATION - SPEED
Because the massager runs at Speed 5 when it is first powered on, SPEED must be pressed to
change speeds.
Press SPEED once and the motor turns to the minimum, Speed 1. One green speed-indicating
•
LED lamp lights up.
Press SPEED again and the motor turns to Speed 2. Speed 1 and Speed 2 green LED lamps
•
light up.
Press SPEED again and the motor turns to Speed 3. Speed 1, Speed 2 and Speed 3 green
•
LED lamps light up.
Press SPEED again and the motor turns to Speed 4. Speed 1, Speed 2, Speed 3 and Speed 4
•
green LED lamps light up.
Press SPEED again and the motor turns to Speed 5. Speed 1, Speed 2, Speed 3, Speed 4 and
•
Speed 5 green LED lamps light up.
Press SPEED again and the motor returns to Speed 1.
•
NOTE: Pressing SPEED thereafter will continuously change the speed sequentially, as described above.
OPERATION - PROGRAM
Press the PROGRAMS button once and PULSING is activated. The corresponding blue LED
•
lamp lights up. The motor continuously runs in sequence of Speed 5 and a brief stop. The
corresponding Speed 5 green lamp lights up.
Press the PROGRAMS button again and ENERGIZING is activated. The corresponding blue
•
LED lamp lights up. The motor continuously runs in sequence of Speed 1, Speed 2, Speed 3,
Speed 4; Speed 1, Speed 2, Speed 3, Speed 4, and so on. The corresponding green Speed
lamps light up.
Press the PROGRAMS button again and SOOTHING is activated. The corresponding blue led
•
lamp lights up. The motor continuously runs in sequence of Speed 1, Speed 2, Speed 3;
Speed 3, Speed 2, Speed 1, and so on. The corresponding green lamps light up.
NOTE:
Pressing PROGRAMS thereafter will continuously change the programs sequentially, as
•
described above.
Whenever PROGRAMS is exited by pressing SPEED, the massager returns to Speed 5 as
•
the default.
7