Publicidad
Idiomas disponibles
Idiomas disponibles
3 Press and hold the SETUP button on your Insignia
universal remote control until the LED under the
device button blinks twice.
4 Press 975. The LED blinks twice.
5 Press the button you want to learn (for example the
TV Power button). The LED begins to blink rapidly.
6 Press the corresponding button on the original
remote (for example the
LED blinks twice to indicate the button has learned
correctly.
7 Repeat steps 5 and 6 for each button you want to
learn.
Notes:
• Your Insignia universal remote can learn from
multiple remotes, but there can only be one function
per button.
• Some remotes send commands differently. If you
find that a function cannot be learned, try holding
down the button on the original remote instead of
pressing and releasing.
8 When your remote has learned all the functions you
want, press and hold the SETUP button until the
LED under the device button blinks twice.
Hints
• If the LED shows one long blink at step 6, the
function was not learned. Try again, beginning at
step 5.
• If you find one or more buttons don't work properly
after set up, you can re-enter the learning mode at
any time by repeating the procedure from step 1.
• If one or more of your original remotes aren't
working, you can still set up your Insignia universal
remote control by using SimpleSet or the device
code setup.
Deleting a learned function
You can delete a learned function and return that
button to its original state.
12
www.insigniaproducts.com
[power] button). The
Publicidad
