O
ption Washing
When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.
1
Press the POWER (AUTO OFF) button to turn power on.
2
Only Wash
Press the WASH button to
select the desired timing.
Only Wash,Rinse
Press the WASH button to
select the desired timing.
Press the RINSE button to
select the desired times of
rinse.
You can use this option
for preventing wrinkles of
laundry
3
Press the WATER LEVEL button, to control the water level according to the
amount of laundry. If you do not choose anything, it is set the middle water
level automatically.
4
Add the laundry into the washing tub.
5
Press the START/PAUSE button.
6
Add the detergent and close the lid.
NOTE
• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not
be drained off. If you wish to drain the water, press SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button.
• If you do not specify the water level, then Medium will be automatically selected.
• If only Rinse is selected, the process will start from Water Supply.
Only Rinse
Press the RINSE button to
select the desired times of
rinse.
Only Rinse,Spin
Press the RINSE button to
select the desired times of
rinse.
Press the SPIN button to
select the desired times of
spin.
Only Spin
Press the SPIN button to
select the desired times of
spin.
Only Drain
When you want to only
drain, wait until the water
in the washing tub drains
completely.
23