Twin-Star International Classic Flame 26II342FGT Manual Del Usuario página 6

OPERATION INSTRUCTIONS
FUNCTION
FLAME
HEATER
TIMER
FLAME SPEED
FLAME INTENSITY
LIGHT
A5453
ICON DESCRIPTION
There are 5 unique Spectrafire flame effects that can be
selected.
1: Spectrafire
2: Sapphire
3: Amethyst
4: Campfire
5: Midnight Fire
AU: Auto Cycle which will automatically fade in and fade out
a new color flame effect periodically.
Pressing and holding the flame button for 3 seconds will
enter the control into the LED cabinet light settings. There
are 4 brightness levels and OFF setting that can be selected.
Settings 1-4 decrease the LED brightness.
After 3 seconds without control input, the display will exit
the LED cabinet light setting and show the fireplace flame
setting.
The fireplace contains three infrared quartz heating elements.
The thermostat setting range is 62°F - 82°F or 17°C - 27°C or
continously ON or OFF (00).
The thermostat is adjustable by 2°F or 1°C increments.
The up and down buttons"
temperature setting.
Pressing the timer button will cycle through the timer
settings; 30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H, 7H, 8H,
9H and OFF (00).
To change between °F and °C press and hold the TIMER
button on the control panel for 3 seconds.
Each Spectrafire flame color option has speed options
available.
Setting S1 is slowest ranging up to setting S5 which is the
fastest.
Each Spectrafire flame color option has 5 intensity options
available.
Pressing the light button on the remote control will cycle the
LED cabinet lights through the different brightness
settings; 1, 2, 3, 4 and OFF. Settings 1-4 will decrease the
LED brightness.
6
" will increase / decrase
www.tsicustomerservice.com