Publicidad
Idiomas disponibles
Idiomas disponibles
SENSOR SETTING
Mode
TIME
Setting
SECURITY
TEST
(DISTANCE)
1MIN
3MIN
10MIN
DUSK TO
NA
DAWN
MANUAL
NA
OVERRIDE
NOTE:
1. TEST: Help to quick adjust and test the fixture, it can detect you and turn on for about 5 seconds
even in daytime.
2.
: DUSK TO DAWN Mode, turn on in the night and turn off in the daytime.
3. Red LED indicator light: The motion detector is provided with a red LED indicator light inside the
detector head to indicate that motion has been detected.
COVERAGE AREA (Fig. 2)
The motion detector has the coverage area about 110°
(see Fig. 2).
Distance Setting
Adjust the "DISTANCE"
to the L, M, H. In H
setting, the fixture will
detect the max range,
APROX 50 ft. and a
detection angle of 110º.
DISTANCE SETTING:
L: Up to 20 ft.
M: Up to 30 ft.
H: Up to 50 ft.
Adjust the "DISTANCE"
to "DUSK TO DAWN".
NA
Description
When the sensor detects you and the light
will turn on for approximately 5 seconds.
NOTE: DUSK TO DAWN MODE IS NA.
At dusk, the motion sensor becomes active.
Any movement within the coverage area will
cause the light to turn on. After movement
has stopped, the light will remain on for the
preset time limit of 1 or 3 or 10 minutes,
then turn off. The motion sensor will remain
active throughout the night.
At dawn, the motion sensor will deactivate,
and remain deactivated throughout the day.
Movement will not cause the light to turn on.
At dusk, the light will turn on throughout the
night until dawn. At dawn, the light will turn
off throughout the day until dusk.
The user may manually turn on the light
using its wall switch. Flip the wall switch off
for 2 seconds and then back on. The lights
will stay on for 5 hours then back to
SECURITY mode.
6
Publicidad
