Publicidad
1. Select PIN code request in the
security settings menu, and then
press
[OK].
2. Set Enable/Disable.
3. If you want to change the setting,
you need to enter PIN code when
you switch on the phone.
4. If you enter wrong PIN code more
than 3 times, the phone will lock
out. If the PIN is blocked, you will
need to key in PUK code.
5. You can enter your PUK code up
to 10 times. If you put wrong PUK
code more than 10 times, you
can not unlock your phone. You
will need to contact your service
provider.
Auto Key Lock
This menu allows to set the time of
Auto key lock.
Phone lock
You can use a security code to avoid
unauthorised use of the phone.
Whenever you switch on the phone,
the phone will request security
code if you set phone lock to When
switch on.
If you set phone lock to When SIM
changed, your phone will request
security code only when you change
your SIM card.
Change codes
PIN is an abbreviation of Personal
Identification Number to prevent use
by unauthorised person.
You can change the access codes:
Security code, PIN2 code.
1. If you want to change the Security
code/PIN2 code input your
original code, and then press
[OK].
2. Input new Security code/
PIN2 code and verify them.
Flight mode
This allows you to use only the
phone's features that do not require
the use of the wireless network
when you are in an airplane or in
places where the wireless network is
prevented.
If you set the flight mode on, the
icon will be displayed on the screen
instead of the network signal icon.
Menu #.7
65
Publicidad
