Publicidad
Idiomas disponibles
Idiomas disponibles
BODY FAT PROGRAM.-
The
("F"
BODY-FAT)
designed to calculate the user's body fat
percentage.
Press the ("F" BODY-FAT) program
key, then press the MODE key and by
using the (↨) keys to select SEX
(Male01– Female 02), press the MODE
key to confirm, use the (↨) keys select
your AGE (10 – 99) press the MODE
key to confirm, use the (↨) keys to select
your WEIGHT (20 – 150Kg).
Press the MODE key to confirm, use the
(↨) keys to select HEIGHT (100 -
200cm), press the MODE key to
confirm.
Place your hands on the handgrip
sensors (R), as shown in Fig.3, and
after a few seconds the screen will
display the result.
FAT. (Body fat).–
The body fat function helps you to
calculate your body fat percentage.
REF. TABLE:
BODY FAT PERCENTAGE %
SEX /
LOW
FAT%
MALE
< 13% 13%-
FEMALE
<23%
BODY TYPE
There are 9 body types based on the
percentage of fat calculated.
TYPE 1
(5%-9%) Extremely athletic
TYPE 2
(10%-14%) Ideal sportsman
TYPE 3
(15%-19%) Very slender
TYPE 4
(20%-24%) Sportsman
TYPE 5
(25%-29%) Ideal health
TYPE 6
(30%-34%) Slender
TYPE 7
(35%-39%) Very overweight
TYPE 8
(40%-44%) Overweight
TYPE 9
(45%-50%) Extremely obese
program
LOW /
AVE
HIGH
AVE
RAGE
RAGE
26%-
>30%
25,8%
30%
23%-
36%-
>40%
35,8%
40%
The main screen will display the type
of profile for your body type.
is
If the error code "E-3" appears then
this means that an error has occurred,
position your hands correctly on the
pulse sensors (R), Fig.3.
EMERGENCY STOP.-
For the user's maximum safety, this unit
is equipped with a safety key (g) and a
STOP button. The safety key (g) must
be slotted into its housing (E), Fig.2,
otherwise the machine will not start.
When you are using the machine
always clip the cord on the safety key to
your clothing. Tugging on the cord will
pull the safety key out of its slot and the
machine will stop immediately. To
restart the machine simply put the key
back into the key slot.
Remove the safety key (g) whenever
the machine is not being used and keep
it out of children's reach. Pressing the
red button marked STOP will also stop
the unit immediately. To restart it, press
the button marked START/STOP again.
Important:
inclination level of your treadmill by
propping it up on objects.
PULSE MEASUREMENT.-
Your pulse rate is measured by
placing both hands on pulse sensors
(R) with which the electronic unitis
equipped. The pulse rate readout will
appear after a few seconds. The heart
symbol beside the pulse rate value will
flash in time with your heart rate,
Fig.3.
IMPORTANT: This is not a medical
appliance and therefore the heart rate
shown
is
purposes.
10
Do
not
change
merely
for
the
guideline
Publicidad
