3. Remove the fan housing assembly.
4. Rotate the fan housing assembly 180° to put the
blower tubes on the opposite side of the backpack.
WARNING: Read and understand the safety
chapter before you operate the product.
Before you start the product
•
Examine the product for missing, damaged, loose or
worn parts.
•
Examine the nuts, screws and bolts.
•
Examine the trigger for correct operation.
•
Examine the power button for correct operation.
To install the battery pack
•
Align the ribs of the battery pack with the slots in the
battery compartment. Push the battery pack into the
battery compartment until you hear a click.
369 - 002 - 17.11.2017
5. Replace the rear cover and lower cover.
6. Replace the screws.
OPERATION
•
To remove the battery pack, push and hold the
battery release button and pull out the battery pack.
9