Publicidad
36
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE
INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries
can occur from furniture tipover.
To prevent tipover:
* Install tipover restraint provided
* place heaviest items in the lowest
drawers
* Unless specifically designed to
accomodate, do not set TVs or other
heavy objects on the top of this
product
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one drawer
at a time
Use of tipover restarints may only
reduce, but not eliminate the risk
of tipover
OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket (2a) aligned in this location.
To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm) through the safety bracket (2a) into the stud.
Drive the screw (2c) through the safety bracket (2a) into the wall stud. Tighten the screw (2b) that was not fully tighened in step 13.
OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket (2a), then move your unit aside.
Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor (2d) into the hole until it is flush.
Move your unit into location and fasten the wall bracket (2a) to the wall anchor (2d) with the screw (2c).
Tighten the screw (2b) that was not fully tightened in step 13.
Translations of this step is on the next page.
39 /42
?? www.altrafurniture.com ??
hole
agujero
trou
option 2
opción 2
l'option 2
2d
2a
2c
For Masonry, Concrete, or other wall materials:
Consult your local hardware store for appropriate
anchors to securely attach the safety bracket.
stud
montante
planche
option 1
opción 1
l'option 1
wallboard
muro
mur
2c
2d
x
2
1
B345962215COM 0
Publicidad
