Sony HT-MT500 Manual De Instrucciones página 28

To check the connection status of
the BLUETOOTH function
Status BLUETOOTH indicator
During pairing Flashes quickly in blue
standby status
Connection is Flashes in blue
being
attempted
Connection has Lights in blue
been
established
Not connected Off
Tips
• Once the BLUETOOTH connection is
established, an indication recommending
which application to install will be
displayed according to what device you
have connected.
Following the instructions displayed, an
application called SongPal, which will
enable you to operate this system, can be
installed.
See "Listening to Music on the Mobile
Device with SongPal" (page 33) for details
on SongPal.
• Perform pairing for the second and
subsequent mobile devices.
Listening to Music from the
Paired Mobile Device
1
Turn the BLUETOOTH function of
the mobile device to on.
2
Press INPUT +/– repeatedly to
display "BT" in the front panel
display.
The system automatically
reconnects to the mobile device it
was most recently connected to.
3
Make sure that the BLUETOOTH
indicator lights in blue.
A connection between the system
and mobile device has been
established.
28
US
4
Start audio playback with the
music app on the connected
mobile device.
Sound is output from the main unit.
5
Adjust the volume.
• Adjust the volume by pressing 
+/– on the remote control.
• Adjust the subwoofer volume by
pressing SW  +/– on the remote
control (page 26).
• You can play or pause the content
by using the playback operation
buttons on the remote control.
To disconnect the mobile device
Perform any of the following items.
• Disable the BLUETOOTH function on
the mobile device.
• Press BLUETOOTH PAIRING on the
remote control.
• Turn off the system or mobile device.
Note
If "BT" does not appear in the front panel
display by pressing INPUT +/– in step 2 of
"Listening to Music from the Paired Mobile
Device," press BLUETOOTH RX/TX on the
remote control once.
Tip
When the connection is not established,
select "HT-MT500/501" on the mobile
device.
Connecting to a Mobile
Device by One-Touch
Function (NFC)
By holding an NFC-compatible mobile
device such as a smartphone or tablet
near the N mark on the main unit, the
system is turned on automatically, then
pairing and BLUETOOTH connection are
performed automatically.