Descargar Imprimir esta página

Zehnder ComfoClime 24 Manual Del Usuario página 6

Ocultar thumbs Ver también para ComfoClime 24:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 17
5. Connection and commissioning: check and test - set-up (installer)
Ensure the ComfoAir Q has the latest firmware version (version 1.10 or above) and if
not this must be upgraded by following the usual procedure (see ComfoAir Q manual) or
through the ComfoClime Control app (see ComfoClime User/app manual).
To initialize the product, proceed as follows:
STEP
ACTION
1
Place the ComfoAir Q in its designed place.
2
Install the ComfoClime as explained in the ComfoClime installer manual.
3
Connect the main ducts to the upper part of the ComfoClime.
Connect the condensation drain to the drain network through an external wet siphon (10cm
guard), choosing the preferred side (see ComfoClime installer manual).
4
For some countries a further open funnel connection could be required.
Connect the unit to the power supply: firstly the ComfoAir Q and secondly the ComfoClime.
5
They switch on automatically.
Perform the ComfoAir Q commissioning following the instructions on its display (See
6
ComfoAir Q installer manual).
To configure and operate the ComfoClime the user must install the ComfoClime Control app
by downloading it from Google Play or Apple Store.
7
Refer to the app manual to provide the provisioning of the system.
To download all the manuals please visit the local Zehnder website, DOWNLOAD section
or use the QR-code present on the front cover of this guide.
6. Normal maintenance and cleaning
It's strongly recommended to perform a proper maintenance and cleaning, following the messages
appearing in the ComfoAir Q display (filters replacement); an accurate overall cleaning must be
performed at least every 2 years by Zehnder service personnel.
It's mandatory that only authorised personnel can operate on the internal components of the unit.
7. Warranty
The ComfoClime is covered by a manufacturer's warranty for a period of 24 months after after fitting,
and up to a maximum of 30 months after the date of manufacture. Warranty claims may only be
submitted for material faults and/or construction faults arising during the warranty period. In the case
of a warranty claim, the ComfoClime must not be dismantled without written permission from the
manufacturer. Spare parts are only covered by guarantee, if they were supplied by the manufacturer
and have been installed by an approved installer.
The warranty becomes invalid if:
■ The guarantee period has expired;
■ The unit is used without the filters properly installed in the ComfoAir Q;
■ Parts are used that have not been supplied by the manufacturer;
■ Non-authorised changes or modifications have been made to the unit.
CAUTION!
The supplier shall not be held liable for any damage, to things or people, caused by
accidents due to a failure to comply with the instructions provided in this manual
and in the following chapters.
6 - EN

Publicidad

loading

Este manual también es adecuado para:

Comfoclime 36