GE GTS18KBPBB Manual Del Propietario E Instalación página 23

TRANSFER FREEZER DOOR
8
HANDLE TO THE RIGHT (CONT.)
Stainless steel handle:
Attach the handle to
the fastener and tighten
with the 3/32" Allen
wrench (supplied).
Line up the handle
with the screw holes in
the bottom of the door
and tighten the screws.
REHANG THE REFRIGERATOR
9
DOOR
Lower the refrigerator door onto the bottom
hinge pin.
Plastic
Washer
Straighten the door and line it up with the center
hinge bracket.
Reinstall the center hinge pin with a 3/8" socket.
Turn it until it extends through the hinge bracket
and into the door.
Plastic Washer
Hinge Pin
Center Hinge
Bracket
Refrigerator Door
Installation Instructions
1
2
23
REHANG THE FREEZER DOOR
10
Lower the freezer door onto the center hinge pin.
Be sure the washer is in place.
Plastic Washer
Lift the top hinge so the pin fits into the door socket.
Support the door on the handle side and make sure
the door is straight and the gap between the doors is
even across the front. While holding the door in
place, tighten the top hinge screws.
Center Hinge Pin