GE GTS18KBPBB Manual Del Propietario E Instalación página 8

About the shelves and bins.
Not all features are on all models.
Tab
Opening
Front bar
8
Spillproof Shelves
(on some models)
Spillproof shelves have special edges to
help prevent spills from dripping to lower
shelves. To remove or replace the shelves,
see Rearranging the Shelves.
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you
to reach items stored behind others. The
special edges are designed to help prevent
spills from dripping to lower shelves.
NOTE: The shelves are shipped with tape on
the back. Remove this tape before attempting
to remove the shelf.
To remove:
Remove all items from shelf.
Slide the shelf out until it stops.
Lift the front edge of the shelf until the
tabs are above the shelf frame.
Continue pulling the shelf forward until
it can be lifted out and removed.
Adjustable Bins on the Door
Adjustable bins can easily be carried from
refrigerator to work area.
To remove:
Lift bin straight up; then pull out.
To replace or relocate:
Engage the bin in the molded supports
of the door and push down. Bin will lock
in place.
Non-Adjustable Shelves on the Door
Detachable shelves deepen and enclose
fixed door shelves, providing more storage
room and greater storage flexibility.
(on some models)
To replace:
Place the rear of the shelf on the shelf
frame just behind the front bar.
Slide the shelf back until the tabs are
above the openings.
Lower the shelf so that the tabs go into
the openings; then slide the shelf all the
way in.
Make sure that the shelf sits flat after reinstallation
and doesn't move freely from side to side.
Make sure you push the shelves all the way in
before you close the door.
(on some models)
NOTE: Bins for the refrigerator and freezer
doors are different sizes and are not
interchangeable.
To remove:
Lift the shelf straight up; then pull out.
To replace:
Engage the shelf extender in the molded
supports on the door and push down.
It will lock in place.