Publicidad
A06115001_bag.qxp_Layout 1 8/26/16 3:46 PM Page 8
USING THE CANISTER VACUUM CLEANER FOR THE FIRST TIME
ENGLISH
How to assemble
1. Press "Open" bar and raise cover.
2. Check to confirm that HEPA
s-filter (A) is in place.
3. Check to confirm that dust bag (B)
and motor filter (C) are in place.
4. Close cover. Press tabs on each
side of hose end (D) until it snaps
into place. (To remove hose, press
tabs on each side and pull to
release.)
5. Push hose handle into wand until
it clicks. (Press tab and pull to
release.)
6. To extend wand, push lever up
and pull.
7. Press tool caddy to clamp onto
wand; store 3-in-1 tool in caddy.
8. Push hard floor nozzle (E) or
Power Nozzle (F) onto wand until
it clicks. (Press tab and pull to
release.)
How to operate
1. Pull out power cord and plug in.
2. Press on/off switch to start. Turn
dial on top of canister to select
desired suction power.
3. Use button on hose handle to turn
on Power Nozzle.
4. To retract cord, press rewind
switch. Hold the plug to prevent it
from hitting you.
8
www.electrolux.com
1
2
D
4
7
1
2
A
3
Click
5
E
8
3
B
C
6
Click
F
4
Publicidad
