Baby Trend SMART STEPS RK02A Serie Manual De Instrucciones página 6

ASSEMBLY
Attach the vibration unit
2
Attachment parts
Gather the parts and locate
the holes of the padded
support tube.
Register corresponding holes
of the vibration unit. To see
inserting orientation, refer
to the Frame Orientation
Diagram on page 5
Screw into the frame
Use the screws and nuts to install the vibration unit.
Correct
Orientation
7
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
*
*
Screws and nuts attached in vibration unit
and will require removal for assembly
Tighten
Screws
Inserting the padding
3
Rear frame view
Flip the Bouncer/Rocker frame
upside down and slip the cover
over the vibration unit (Fig 3a).
NOTE: Keep buckle straps over
the tubes at all times.
Pull the fabric over the
vibration one side at a time
until completely wrapped
(Fig 3b).
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
vibration unit
entry
Bottom
of fabric
covering
Holes Facing
down
Top arch
orientation
Fig. 3b
Fig. 3a
8