Front Runner FAMG001 Instrucciones De Montaje página 3

2
FIT AND SECURE
2.1
2.2
2.3
FAMG001_REV_A00
Before you start the fitment, remove the roof
insert covers, using a panel tool or flat screw
driver.
If you are fitting a Full Rack, remove all 6
covers.
If you are fitting a Half Rack, remove the
middle and rear covers.
NOTE: For fitment of a Full Rack do Step
2.2 and 2.3.
For fitment of a Half Rack proceed to
Step 2.3.
4mm
Join the Front and Rear Foot Rails (Items 1 &
2) together using M6 x 16 Button Head Bolts,
10mm
M6 x 12 x 1SS Flat Washers, M6 Nyloc Nuts
and the Joiner Plates (Items 3, 4, 5 & 6).
Place a M6 Nut Cap (Item 7) over each of the
Nyloc Nuts when done.
Assemble the Base Spacers (Item 15) to each
of the feet on the Foot Rails using the Round
Spacers (Item 18), M5 x 13 x 1SS Flat Washer
and M5 Nyloc Nuts (Items 13 & 14) as shown.
Fully tighten and place a M6 Nut Cap (Item
8mm 12) over each of the Nyloc Nuts.
3 © 2019 FRONT RUNNER VEHICLE OUTFITTERS