Publicidad
Idiomas disponibles
Idiomas disponibles
10.1
START THE MACHINE
1
2
1. Push and hold the start button (2).
2. While you hold the start button, pull the bail switch (1) in
the direction of the handle bar.
3. Once the machine has started you can release the start
button.
10.2
STOP THE MACHINE
1. Release the bail switch to stop the machine.
WARNING
Wait until the blades fully stop before you start the machine
again. Do not quickly turn the machine off and on.
WARNING
Always remove the battery pack after you complete the
work.
English
10
9
11
10.3
OPERATE THE SELF-PROPEL
DRIVE SYSTEM
1
2
1. Start the machine.
2. While you hold the bail switch (1), pull the self-propel
lever (10) in the direction of the handle bar.
3. Hold the bail switch and the self-propel lever at the same
time with your right hand.
4. Adjust the speed control button (9) with your left hand.
•
Push the speed control button in the direction of the
Rabbit Symbol to increase the speed.
•
Pull the speed control button in the direction of the
Turtle Symbol to decrease the speed.
5. Release the self-propel lever to close the self-propel
system.
To engage the self-propel drive system while the mower is
not running:
•
Pull the self propel lever (10) upward to the handle.
To disengage the self-propel drive system while the mower
is not running:
•
Release the self propel lever.
10.4
EMPTY THE GRASS CATCHER
1. Stop the machine.
2. Remove the battery pack.
3. Open the rear discharge door and hold it.
10
9
EN
Publicidad
