Whispbar K991W Instrucciones De Montaje página 8

EN
Fitting Kit
K991W
Remove plastic clamp block by gripping bar
leg with fingers and push firmly with
thumbs until clamp block drops out behind
leg.
Select plastic internal block (from fitting kit)
and insert into foot.
Repeat for all legs.
CAUTION:
RECOMMENDED POSITION DUE TO
AIRBAGS IN ROOF:
Please check the front of this manual for
information relating specifically to your
vehicle.
Apply masking tape to vehicle roof in all
four positions.
Mark reference point on masking tape with
a pen.
8