Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read,
understand, and follow the information provided with
and on this attachment. The owner and operator of this
equipment shall have an understanding of this product
and it's safe operating procedures before attempting to
use. The owner and operator shall be aware that use
and repair of this product may require special skills and
knowledge. Instructions and safety information shall be
conveyed in the operator's native language before use of
this lift is authorized. If any doubt exists as to the safe and
proper use of this lift, remove from service immediately.
Inspect before each use. Do not use if broken, bent,
cracked or damaged parts are noted. Any lift that appears
damaged in any way, or operates abnormally shall
be removed from service immediately. If the product
has been or is suspected to have been subjected to
a shock load (a load dropped suddenly, unexpectedly
upon it), immediately discontinue use until it has been
examined by a Pro-Lift HD authorized service center.
It is recommended that an annual inspection be done
by qualified personnel. Labels and Operator's Manuals
are available from the manufacturer (see Replacement
Parts, pg. 4).
Adjustment Knob
Hitch Connector
Hitch Connector
Positioning Pin
Hitch Connector
Pin
Swivel Arm
Figure 1 - Model T-2300AT Nomenclature
PRODUCT DESCRIPTION
The Pro-Lift HD UTV attachment is designed to attach
to the T-2300 saddle and support, up to rated capacity
loads, a single vehicle whose frame is compatible with
the lifting platform. The attachment include rotatable
arms to support a multitude of different frame structures.
Incompatibility is evident when the support pads do
not align with the vehicle's frame, and/or the vehicle
feels unstable. This product is NOT suitable for lifting,
leveling and/or positioning automobiles, trucks, SUV's
or conveyances other than those specifically listed
and approved above. This product is NOT suitable for
lifting, leveling and/or positioning houses, construction
trailers and dwellings in general. This product does not
contain independent lifting devices, but is designed to
be permanently assembled. The Hydraulic Unit is not to
be used independently of the lift.
ATV Attachment
ATV Attachment Bolt
Load Support
Swivel Lock
Attachment Nuts
Attachment Bolts
(x4)
(x4)
2
Before Use
1. Before using this product, read the operator's manual
completely and familiarize yourself thoroughly with the
product, its components and recognize the hazards
associated with its use.
2. Verify that the product and application are compatible,
if in doubt call Customer Service (888) 332-6419.
3. Inspect jack stands before each use. Ensure that all
parts move freely. Do not use if there are bent, broken
or cracked components noted.
ASSEMBLY
1. Fasten the UTV attachment to the T-2300 lift saddle
with the provided bolts.
2. To use the ATV attachment, remove the hitch
connector by unscrewing the adjustment knob. Attach
the ATV attachment with the attachment bolt.
OPERATION
1. Line up vehicle undercarriage with load supports. To
adjust the position of the swivel arms, pull the swivel
lock down to disengage the lock. Then rotate the arm
to the desired position and release the lock.
!
WARNING: Ensure the swivel lock is completely
engaged before lifting the vehicle.
2. Lift saddle to just before contact to ensure the contact
area will be in a proper location.
!
WARNING: Use only on hard, level surfaces capable
of sustaining rated capacity loads.
3. Line up vehicle hitch adapter with product's hitch
connector.
4. Close Hydraulic Release Valve and carefully pump
jack until vehicle reaches desired height. Final height
must correspond with the locking teeth on the Height
Locking Lever.
5. Carefully turn the Release Knob counterclockwise
until the Lift Platform engages the Height Locking
Lever, then close the Release Knob by turning it
fully clockwise. Do not work around or under load
unless Height Locking Lever is properly engaged.
!
CAUTION: Clear all tools and personnel before
lowering load. Only attachments and/or adapters
supplied by the manufacturer shall be used with
this device.
6. To lower the Lift Platform pump the Lift Pedal several
times to disengage the Height Locking Lever, then
depress the Height Unlocking Lever pedal. Carefully
turn the Release Knob counterclockwise to lower the
load slowly.
WARNING
!
• Study, understand and follow all instructions before
operating this device.
• Use of this product is limited to lifting, lowering and
holding loads consisting of a single vehicle whose
lifting points are compatible with the lifting platform.
Incompatibility is evident when the loaded vehicle
wobbles, appears unstable, and/or does not
securely engage the lift platform.
• Do not exceed rated capacity.
• Use only on hard, level surfaces.
• Center load on lift platform.
• Immediately after lifting load, ensure Height
Locking Lever is engaged.
• Engage locking caster mechanism before working
on or around loaded lift. Do not move or dolly load
supported by this device.
• Restraining an incompatible load will not make the
load secure and may cause unexpected loss of
load.
• Never work on, around or under a load that is not
secured and stable.
• Keep operator's and bystander's head, hands and
feet away from lift arms when raising and lowering.
• No alterations shall be made to this product.
• Failure to heed this warning may result in personal
injury and/or property damage.
Figure 2: Mounting UTV attachment.
3
Publicidad
