Front Runner FAFF004 Instrucciones De Montaje página 4

2
FIT AND SECURE FOOT RAIL
2.4
3 FIT AND SECURE ROOF RACK
3.1
2.1
2.4
3.2
2.2
3.3
Center the rack and tighten fully. Use M8 Nut Caps (Item 4) to finish off the nuts.
FAFF004_REV_A00
Place a bead of silicone around each of the
Jack Nut openings inserted earlier
in 2.3.
To fit the Foot Rails (Item 1LH & 1RH), place
the Spacers (Item 2) over the Jack Nuts
inserted in 2.3, followed by the Foot Rail
(Item 1).
Place silicone on the threads of the M6 x 40
Hex Bolts and secure the Foot Rail using
M6 SS Spring Washers and M6 x 19 x 1SS
Flat Washers (Items 9, 10 & 11) as shown.
Do this on both the left and right side of the
vehicle.
Finish off by placing M6 Nut Caps (Item 8) on
10mm
the M6 Hex Bolt heads.
Make sure that the wind deflector is installed
before you proceed to the next step.
Refer to Rack Fitment Guide.
4MM
Fit your Roof Rack to the Foot Rails using
M8 x 20 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nyloc Nuts (Items 5, 6 & 7)
as shown.
13mm
4
© 2020 FRONT RUNNER VEHICLE OUTFITTERS