Publicidad
Installation
5. Screw CD valves (C) into the installation kit, ensuring that the left hand CD valve
has the mark as shown. Ensure CD valves are fully tightened.
6. Push spindle adapters (D) onto CD valves (C) and secure using long screws (E).
7. Apply suitable silicone sealant to the wall where the side valve assembly (F) will sit.
Screw lever/roundel bodies (F1) onto the CD valve (C), while at the same time holding
lever/roundel controls (F2) stationary.
8. Screw spout tail (G) into the installation kit. Ensure the spout tail (G) is fully tightened
using a 12mm Allen key.
9. Apply suitable silicone sealant to the wall where spout (H) will sit. Slide spout (H)
onto spout tail (G).
10. Align spout (H) and secure using grub screw (I) and an Allen key as shown. Ensure
grub screw (I) is fully tightened.
Important note: The instructions show the "LA" lever option, the assembly method
and set up are the same for the "LB", "R", "CCR" and "CBR" handle options
Publicidad
