Johnson JCRL120P Manual De Instrucciones página 39

3. INSTALLATION METHOD
5. Fasten the back plate of the wire controller
For exposed mounting, fasten the back plate on the wall with the 3 screws
(M4×20) and plugs. (Fig.3-5)
Screws (M4×20)
For flush-mounting, fasten the back plate on the switch box with 2 screws
(M4×25) and fasten it on the wall with 1 screw (M4×20). (Fig.3-6)
Screw (M4×20)
Screws (M4×25)
NOTICE
Put on a flat surface. Be careful not to distort the back plate of the
wire controller by overtightening the mounting screws.
Back plate
Switch box
Back plate
Fig 3-6
40
Fig 3-5
V.2