Publicidad
Idiomas disponibles
Idiomas disponibles
•
Mute: Click one of these buttons to
mute either the music only (Music) or
all audio signals (All).
•
Ethernet:
Use
configure your Ethernet settings. Click
one of the Mode buttons to set them
to
detect
the
automatically (Auto) or to use the
settings you enter yourself (Manual).
Click the IP Address, Subnet Mask,
Gateway, or IP Control Port fields and
enter the numbers for each using your
computer keyboard.
•
Baudrate: Click one of the buttons for
each port to set the baud rate of each
one. RS232C is for the Remote Port.
RS422 is for the RS-422 Port. Each
rate is shown bits per second (BPS).
•
Amp: Use these buttons to set the
options for Hi Impedance Mode (70V,
100V, or Off), whether the Hi Pass Filter is enabled (On) or disabled (Off), whether BTL mode
is engaged (On) or disengaged (Off), and the Impedance Mode (4 Ohm or 8 Ohm).
•
Time: Click each menu next to System Time to set the current month, day, year, hour, minute,
and second. DN-508MXA will display this at the top of the web interface and will use it for
scheduling.
Click one of the Enable buttons to enable (On) or disable (Off) daylight saving time. When on,
click each menu below it to set the month, day, and hour that daylight saving will start and end.
Click the Offset menu to select how much the time will be shifted.
•
Password: Use these fields to set a
new password for the administrator
(Admin), which can control all DN-
508MXA functions, or the operator
(Operator), which can control only
certain functions. Click each field and
enter the characters for your current
password (Old Password) and the new
password twice (New Password and
Confirm Password). Click Save to
save the new password.
•
Firmware: This field shows the DN-
508MXA firmware file to upload, if any.
To
upload
a
your computer to DN-508MXA, click
Browse, and then find and select the
file. After that, click Verify to confirm
the file is valid. If it is valid, then click
Execute to update the firmware.
Important:
Visit
download
the
DN-508MXA.
•
Information: This section shows the
current network addresses (as set in the
Ethernet section) and firmware version
(as set in the Firmware section).
12
these
controls
to
network
settings
firmware
file
from
denonpro.com
to
latest
firmware
for
Publicidad
