Denon Professional DN-508 Guia De Inicio Rapido página 7

Operation
After setting up and powering on DN-508MXA and your connected devices, you can start
using DN-508MXA.
Important: The default administrator password is adminpwd. There is no default operator
password.
Using the LCD Interface
Navigating the Display and Menus
To switch between the Menu and the settings of the current zone, press Menu.
To move through the options in the display, turn the Volume/Sel knob.
To select an option in the display, press the Volume/Sel knob.
To return to the previous screen, press Mute/Back.
Managing Zones
To select a zone, press the desired output selector. The currently selected one will be lit
amber. The source selectors of any audio sources that are assigned to that zone will light up
amber, as well.
To assign or unassign an audio source to a zone, press the desired output selector, and
then press the desired source selector. The source selector for the currently assigned audio
source will be lit amber. Only one source can be assigned to a zone at a time.
To set the volume level of a zone, press the desired output selector, and then turn the
Volume/Sel knob.
To mute a zone, press the desired output selector, and then press the Mute/Back button.
Turn the Volume/Sel knob to select whether to Mute or Unmute the channel, and then press
the knob to select it.
Using the Web Interface
Important: To use the web interface, both DN-508MXA and your computer must be
connected to the same network. We recommend connecting the Ethernet Port and your
computer to a network switch or router using standard Ethernet cables. If your computer is
wirelessly connected to your router, connect just DN-508MXA to that router. Alternatively,
connect DN-508MXA's Ethernet Port directly to a computer using an Ethernet crossover
cable.
To open the DN-508MXA web interface, on your computer, open a web browser.
•
If DN-508MXA is connected directly to a computer, go to
browser. You may have to enter the operator password. There is no default password,
but if you have already set one, you will have to enter it here.
•
If DN-508MXA is connected to a network switch or router (wirelessly or wired), use the
Menu button and the Volume/Sel knob to do the following:
i. Press Menu to enter the Menu.
ii. Select and enter 2. System, then Ethernet, then IP Address, and then the Auto
setting (you may have to enter the administrator password).
iii. Set Auto to On, and select Yes when asked if you want to apply the change.
iv. Press the Mute/Back button to return to the previous page, and then select IP
Address again. The display will now show a maximum 12-digit IP address. Enter this
address into your web browser as http://###.###.###.###. You may have to enter the
administrator password. The default administrator password is adminpwd.
http://192.168.0.1 in your web
7