Publicidad
Idiomas disponibles
Idiomas disponibles
SAVE THESE INSTRUCTIONS
You will need this manual in order to check safety and caution rules,
assembly instructions, operating and maintenance procedures.
Keep your invoice with this manual. Fill in the invoice number in the
inner side of the front cover. Keep the manual and invoice in a safe
and dry place for future reference.
SAFETY INSTRUCTIONS
NOTE
When using tools, basic safety precautions should
always be followed to avoid risk of personal injury as well
as damaging the equipment.
Read all the instructions before using any tool.
1. Keep your work area tidy. Cluttered areas and benches invite
accidents.
2. Consider work area environment. Do not use power
tools in damp or wet locations. Do not expose power tools
to rain. Keep work area well lit.
Do not use power tools where flammable liquids or gases
are present.
3. Guard against electric shock. Prevent body contact
with grounded surfaces such as pipes, radiators or
refrigerators.
4. Keep children away. Children should never be near
work area.Children are not permitted to hold machinery,
tools or extension cables.
Visitors are not allowed to handle tools; they should be
kept away from work area.
5. Store idle tools. When not in use, tools should be
stored in dry and dust free shelves, padlocked and out of
children's reach.
6. Do not force the tool. It will do the job better and safer at the
rate for which it was intended.
Do not use inappropriate attachments to exceed the tool's capacity.
7. Use the right power tool. Do not force small tools to do
heavy-duty jobs. Do not use power tools for heavy-duty jobs for
which it was not designed.
8. Dress properly. Do not use loose clothing, gloves, ties or jewelry.
They can be caught in moving parts. Non-skid footwear is
recommended. Use hair covering to contain long hair.
9. Protect your eyes. Always wear appropriate safety
accessories authorized by the Mexican Official Standard
(Norma Oficial Mexicana NOM). Wear goggles, face and
dust masks when working with materials that shed metallic
parts, shavings or chemical dust.
10. Do not use the power cord for purposes different than those
it was intended. Do not carry tool by the power cord or yank to
disconnect it from socket. Protect cable from heat, oil and sharp
edges.
11. Secure work piece. Use clamps or vices to hold work piece
steady. Is safer than using one hand and enables to use both hands.
Keep proper footing and balance at all times. Do not overreach over
or walk across the tool when is running.
12. Do not extend your range of action. Avoid a standing position
that makes you get tired. Keep a safe position and stable balance.
13. Keep tools in the best conditions. Keep tools clean to get
better performance. Follow lubrication and appliance replacement
instructions. Verify periodically the tool's cables; if damaged have
them repaired in a Truper
should always be clean, dry and free of oil and grease.
14. Disconnect tools. Disconnect tools when idle, and before
servicing.
15. Reduce the risk of unintentional starting. Do not carry a
plugged-in tool with your finger on switch. Be sure switch position
is OFF before plugging in power cord.
Authorized Service Center. Handles
®
16. Outdoor use extension cords. Extension cords should be
equivalent and duly marked.
17. Stay alert. Watch what you are doing. Use common sense.
Do not operate tool when tired.
18. Check damaged parts.
carefully check guards or damaged moving part. Ascertain
it operates and performs properly. Check moving parts
alignment, binding, breakage, mounting and any other
condition that may affect its operation. In order to
guarantee proper function of the tool, all components
should be adequately assembled and complying with the
requirements. Any worn switch should be replaced in a
Truper
Authorized Service Center. Do not operate any
®
power tool if the ON/OFF switch is not working.
19. Parts and accessory replacement. When in need of replacing
parts use only original Truper® spare parts designed to be used
with this tool.
CAUTION
20.
accessories or additional equipment specified in this
manual or recommended by the manufacturer. Using of
any other accessory not specified in this manual may
present risk of personal injury.
21. Ear protection. When performing services with a
noise level higher than 85 dB wear protective earplugs.
This tool is not designed for people (children included) whose
physical, sensorial or mental capacities are reduced. Neither by
inexperienced people or with no knowledge of the tool; only if
they are supervised by persons responsible of their safety or
who have received previous instructions on how to operate the
tool.
Children should be supervised to verify they do not
CAUTION
play with the tool. It requires tight supervision when
disabled people or children use any power tool or are
near one.
Before using the tool,
For your personal safety use only
1
Publicidad
