Publicidad
Idiomas disponibles
Idiomas disponibles
vehicle's battery to maintain a fully charged
condition which can maximize the power and
efficiency of the inflator.
To check and verify the actual tire pressure, the
inflator must be in OFF (O) position.
Check for misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the tool's operation. If
damaged, have the tool serviced before using.
Many accidents are caused by poorly maintained
tools.
Maintain the tool with care. A properly maintained
tool will function more smoothly and prevent
binding, making it easier to use.
Store the tool away from children or untrained
persons when not in use.
The tool can be
dangerous when used by untrained persons.
Do not use the tool for anything other than its
intended use.
Do not use the tool if the power switch does not
actuate properly. Any tool that cannot be
controlled with the power switch is dangerous and
must be repaired.
Keep the tool dry, clean and free of oil and
grease. Always use a clean cloth when cleaning.
Never use brake fluids, gasoline, petroleum-based
products, or any strong solvents to clean your tool.
Never use gasoline or other flammable liquids
to clean the tool. Never use the tool in the
presence of flammable liquids or gases. Vapors
could ignite by a spark and cause an explosion
which will result in death or serious injury.
Do not drop or throw the tool. Dropping or
throwing the tool can result in damage that will
make the tool unusable or unsafe. If the tool has
been dropped or thrown, examine the tool closely
for bent, cracked or broken parts. STOP and repair
before using or serious injury could occur.
Do not operate the tool if it does not contain a
legible warning label.
TOOL SERVICE
Only use accessories that are identified by the
manufacturer for the specific tool model.
Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of
injury.
Tool service must only be performed by a
qualified repair personnel.
UNPACKING
This tool has been shipped completely assembled.
Carefully remove the tool and any accessories from
the box.
Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
04
HTTP://WWW.FREEMANTOOLS.COM
MODEL: P45LMTI
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
If any parts are damaged or missing, please call
1-888-669-5672.
WARNING:
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
serious personal injury.
WARNING:
Do not attempt to modify this tool or
create accessories not recommended
for use with this tool. Any such alteration
or modification is misuse and could
result in hazardous conditions leading to
possible serious personal injury.
SPECIFICATIONS
POWER REQUIREMENT:
12 V DC
MAX POWER
250 W
SCFM
1.6
MAX PRESSURE
100 PSI
FEATURES
Built-in 100 PSI analog metal gauge
LED working light
3 Inflation tips
Braided air hose with solid twist-on air chuck
10 ft power cord with battery clamp
10 ft extension PU hose
Carrying bag
1-888-669-5672
MODEL: P45LMTI
OPERATION
INFLATING TIRES
1. Make sure the vehicle engine is running and the
power switch is at the OFF (O) position.
2. Remove tire dust cap and twist the air chuck onto
the valve stem tightly.
3. Connect battery clamps to positive and negative
terminals of the vehicle battery.
HTTP://WWW.FREEMANTOOLS.COM
4. Switch the tire inflator to ON (-) position to inflate
the tire. Keep the engine running during the entire
inflating time.
5. When the pressure gauge indicates the desired
pressure, turn off the inflator by switching to OFF
(O) position.
6. Unscrew the inflator chuck from the tire valve
stem. Put back the dust cap and unplug the power
cord from the socket.
1-888-669-5672
05
Publicidad
