SP6947 RIDGID 5 Gallon ESF_SP6947 3/11/15 9:49 AM Page 9
Hanging Vac on Storage Rack (cont.)
Cord Storage
When your Stor-N-Go Wet/Dry Vac is not
in use, it should be unplugged from the
outlet. Excess cord should be wrapped
over the hose storage rack. Several loops
may be required to eliminate any tripping
hazard created by a loosely hanging
cord.
Removing Vac from Storage
Rack
1. Unplug the power cord from the
electrical outlet. Remove the cord from
the cord retainer. Drape the loose cord
over the top of the Vac.
2. With your right hand, grasp the carry
handle.
3. With your left hand depress the release
tab located on the left side of the
storage rack.
4. Lift up on the handle, and pull the Vac
up and out of the storage rack.
Cord
9
Cord Retainer