TREVIDEA Girmi MX38 Manual Del Usuario página 10

that will be in touch with food: shaft and blades.
To avoid the overheating of the motor, do not use the
appliance continuously for more than 30 sec, then make at
least 5 minutes rest. Do not use the product without food.
Do not insert your fingers inside the bowl while the mixer
is running. Before operating the appliance, check that all
the parts are correctly installed.
Never leave the appliance unattended while it is running.
CAUTION! Unplug the unit from the socket
before touching the blades for any reason, such as
cleaning or foods removing. CAUTION! Always
unplug unit from electrical outlet each after use
and/or before touching blades and/or before installing
or removing any accessory or attachment.
To clean shaft and accessories, it is recommended using
warm tap water and containing the use of detergents.
When cleaning with detergents, rinse thoroughly.
Do not immerse the top of the mixer in water or other
liquids, clean it with a damp cloth.
PARTS MX38
1. Function lights
5. Cup
OPERATING
Assemble motor housing to the immersion stainless-steel shaft as described in the "Assembling the shaft"
section. Plug the unit to the electrical outlet. Insert the mixer in the bowl with the food to blend (ensure to
immerse the entire blade to avoid any splashing). Press the button (speed I or II) to start operating. For best
results, follow the instructions in "Setting processing speed" section.
CAUTION! Do not insert your fingers inside the bowl containing food
- Unplug the hand blender from the electrical outlet, once finished working,
This appliance is not suitable for chopping hard foods or ice. It is suitable for making baby food, milk shakes,
sauces, juices, cocktails, soups, vegetable soup, etc. ... When processing fruits or vegetables, add also a small
quantity of water to allow the device to operate in a homogeneous way.
Insert motor body (4) in the shaft (6). Rotate anticlockwise until it blocks. For unblocking, rotate clockwise.
SETTING THE WORKING SPEED
The unit features two working speeds (2 and 3 button). For best results and to avoid overheating, it is
recommended to use the unit for short and regular intervals, then for a long time, always making circular
movements inside the container of food. It is also recommended to start processing food from the first speed,
ending up using the faster speed.
2. Switch low speed
6. Stainless steel immersion shaft
Assembling the shaft
3. Switch high speed 4. Motor body
7. Blades
9