JVC DLA-RS2 Manual De Instrucciones página 45

Command and data
Operating command and data (Binary code)
Command
0000
5057
4950
4754
4750
4752
4747
4742
5453
5243
Type
Checks whether communication is available between this unit and
Connection check
the PC during standby.
During standby
31 : Turns on the power.
Power supply
During power on
30 : Turns off the power. (Standby mode)
During power on
30 : S-VIDEO
31 : VIDEO
Input
32 : COMP.
36 : HDMI 1
37 : HDMI 2
During power on
30 : Switches to "Normal".
31 : Switches to "Theater1".
Gamma table
32 : Switches to "Theater2".
33 : Switches to "Dynamic".
34 : Switches to "Custom".
30 : 1.8
31 : 1.9
Gamma coefficient 32 : 2.0
33 : 2.1
34 : 2.2
Sets the gradation (0 ~ 1023) of the output signal in hexadecimal.
Gamma data (R)
The data is 16 bit (2 byte) with the 2 byte data in the high/low order.
Gamma data (G) Same as gamma data (R).
Gamma data (B) Same as gamma data (R).
During power on
Test pattern 30 : Do not display.
36 : Displays staircase (gray).
Sends the same code as the supplied remote control.
Remote Control
"Remote control code" (pP47)
ENGLISH
Data description
35 : 2.3
36 : 2.4
37 : 2.5
38 : 2.6
45