Lenco SCD-620 Manual De Usuario página 8

POWER SUPPLY
1. To power the device, plug the AC power cord into the AC power input on the rear of the unit and
a standard power outlet
2. For battery power, this unit requires 6 x C size batteries (Not included).
POWER SOURCE
Press the "POWER" button to turn the device.
Set the "FUNTION" switch to select different mode
CD/AUX
FM
VOLUME
Adjust the "VOLUME" knob to the desired volume level.
ANTENNA
Use Antenna to improve the signal reception.
1. Extend the antenna
2. Adjust the position of the antenna for the best reception
CD
Select the CD mode.
1. Put CD into the CD door insides
2. Auto CD reading & playing from first track
3. Press the "PLAY/PAUSE" button to do playback or pause playback temporarily
4. Press the "SKIP+/-" button to skip the next or previous tracks
5. Press and Hold the "SKIP+/-" button search the point of sound quickly
6. Press the "STOP" button to stop the playback
PROGRAMMED (CD MODE)
CD = max 20 tracks
1. Press "PROGRAM" button (Sure to press "STOP" button before)
* Program Indicator flashing
2. P01 will appear blinking in the display, press "SKIP+/-" to select the track Press "PROGRAM"
button again to save the selected track
3. Press "PLAY/PAUSE" button to play the programmed track list "PROGRAM" indicator on
4. Press "STOP" button twice to cancel the programmed track list
* Repeat One and Repeat All function is available for programmed track list
8