Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1
PREP YOUR HOME
• Before cleaning, clear cords and remove small
obstacles like clothing or toys that are less than
8cm tall.
• Open interior doors in rooms you want your robot
to clean.
STEP 3
SET UP THE DOCK
1m
1m
For best
1.6m
results,
place on
bare floor.
• Find a permanent location for the dock, as pictured
above, in a central area with a strong Wi-Fi signal.
• Place the dock on bare floor, with its back against
the wall.
• Plug in the dock. The Indicator Light will illuminate
green when the dock has power.
STEP 5
CHARGE THE ROBOT
6
h
First
Charge
INDICATOR
Place robot on dock to charge. The dock indicator
light will turn blue and the robot will beep when
charging begins.
SETUP
STEP 2
PREP THE ROBOT
.......... Side Brushes ..........
• Remove protective film from robot and dock.
• Attach side brushes.
STEP 4
POWER ON ROBOT
To charge, the Power button on the side of the robot
must be in the ON position (I).
STEP 6
DOWNLOAD THE APP
SharkClean
App Features
✔ Scheduling
✔ No-Go Zones
✔ Vacuum Modes
✔ Room Select
✔ Home Map
Search for "Shark Clean" to download the app.
NOTE: For more information on connecting your robot,
see next page.
STEPS FOR SUCCESS
To set up a map of your home in
the app, you need to complete an
Explore Run.
• This will take less time than a full vacuum run.
• After the Explore Run, there will be an
interactive map of your home in the app, and
your robot will be ready to clean.
After the explore run is complete, press the Clean
button on the robot or in the app to send the robot
on its first vacuuming run.
LIVING WITH YOUR ROBOT
INTERACTIVE MAP
After the Explore Run, the robot will create an
interactive map in the app, where you can create
rooms and no-go zones.
AVOID MOVING THE ROBOT OR DOCK
While your robot is cleaning, do not pick it up and
move it, or move the charging dock – this will impact
the robot's ability to map your home.
Questions? Easy Steps If You're Stuck:
Having trouble connecting to your robot?
For how-to videos, FAQs, troubleshooting, and tips & tricks visit: sharkclean.eu
EXPLORE RUN
DOORWAYS AND THRESHOLDS
Your robot can easily climb over most thresholds,
but if one is too high, set up a no-go zone in the
app to block it off.
EMPTYING THE DUST BIN
During the first few weeks of use, the dust bin will
need to be emptied more frequently, as your robot
will now be removing dust and debris from areas
that were previously hard to reach. Empty debris
and dust into trash.
Remove any debris between the filter and the
plastic shield.
s h a r kc l e a n . e u
Publicidad
