GE PT9800 Manual Del Propietário página 34

Troubleshooting Tips ... Before you call for service
Problem
DISPLAY
Control display is lit yet oven
will not start
OTHER PROBLEMS
The door and inside of the
oven feels hot
Oven will not start
Cannot edit cooking features
The pads on one side of the
control do not function
34
Possible Cause
Clock is not set.
Door not securely closed.
pressed after entering cooking selection.
Another selection already entered in oven
Size, quantity or cooking time not entered
after final selection.
The heat lamps produce intense heat in a
small space.
A fuse in your home may be blown or the
circuit breaker tripped.
Some pre-programmed cooking features
may not be able to be edited to prevent
degradation of cooking performance.
The control has locked out the use of these
pads and need to be reset.
What To Do
Set the clock.
Open the door and close securely.
Press Start/Pause pad or selector dial.
Press Clear/Off pad.
Make sure you have entered cooking time after selecting.
Reset cooking program and press Start/Pause pad.
This is normal. Use oven mitts to remove food when ready.
Replace fuse or reset circuit breaker.
This is normal.
Press and hold the Clear/Off pad on the other side of the
display for 30 seconds. If this does not reset the control, it
may be necessary to cycle the circuit breaker.
49-80741 Rev. 4