4.3
Secondary Suspension
Hanger
Where a hanger is provided, the bearing parts of the hanger shall be capable of
supporting ten (10) times the weight of the luminaire without permanent
deformation and shall be manufactured from non-combustible materials such as
steel or its equivalent.
Accessories
The design of the luminaire shall be such that removable accessories, e.g. colour
frames and barn doors, when properly inserted, cannot fall out of the luminaire.
Secondary Suspension
A secondary suspension shall be provided for the luminaire, except where the
luminaire is arranged for floor mounting or if it is intended for handheld use. The
secondary suspension shall be designed and mounted in such a way that in the
event of a failure of the primary suspension, no part of the luminaire can fall.
The secondary suspension must withstand a 30 cm vertical drop for 30 times.
4.4
Remote Control and Batteries
Do not puncture batteries or throw them in fire as they may explode. Do
not attempt to recharge non-rechargeable batteries (alkaline). Dispose of
batteries in accordance with local regulations. Keep batteries away from
5.
Overview
Refer to the illustrations on page 2 of this manual.
Laser Projector
1
2
3
Remote Control
a
b
c
V. 01 – 18/01/2018
laser output
mode control
LED
auto mode
colour selection
manual mode
HQPE10007
WARNING
children.
4
5
d
e
f
7
microphone
wireless remote
sound-activated mode
on-off
colour selection
©Velleman nv