Publicidad
Idiomas disponibles
Idiomas disponibles
TYPICAL CONNECTION AND CABLE SECTION
Art. ECA8
4X0,75mm2
4X0,75mm2
3X1,5mm2
Linea 230V
INSTALLATION
1. Before securing the plates supplied, establish the measurements using the data
provided in Table 1, in accordance with the wing opening angle.
2. Fix the motor support plates securely.
GATE WING OPENING ANGLE
Establish the required opening angle opportunely positioning the opening locks for the shutters.
Installation of mechanical limit stops.
At the open and closed positions of the sliding gate, it is recommended that mechanical limit stops are fitted which are able to stop the movement
of the gate during both opening and closing. Always follow the recommendations of the various relevant standards.
In the case of gates longer than 1.6 m the use of an elbow-bolt, type ZD06 (Fig. 3) or ZD26, with electric door lock Art. ZD04 (Fig. 3A) is recommended.
EA32
2X1,5mm2 (12 Vdc )
4X1,5mm2 (230 Vca )
2X0,75mm2
Photocell Rx
RX Fotocellula
Art. EFA1
Art. EDS1
9/32
Photocell Tx
TX Fotocellula
Art. EFA1
2X0,75mm2
20mm
A
Fig.3
GB
Art. ELA1/L
Fig.2A
Fig.3A
Publicidad
