OPERATION - General
The appliance is intended only for domestic use, not for professional use.
Figure 1
3
2
1. The LCD-display shows that:
a. a negative value is measured
b. the tare function is being used
c. the surface is stable
d. an automated reset is taking place
e. the weight is measured in kilograms
f.
the weight is measured in pounds and
ounces
g. the weight is measured in ounces
h. the weight is measured in grams
OPERATION - Before use
For your convenience, the factory has already placed two batteries (type
CR2032) in the appliance.
1. Open the battery compartment (figure 1, no. 5) at the bottom of the
appliance, by pulling back the cap (figure 2).
2. Remove the sticker from the batteries before using the appliance.
3. Close the battery compartment.
5
a
2. Unit button (kg / lb / oz / g)
3. Weighing platform
4. On/Off button and Tare button for tare function
5. Battery compartment (bottom side)
Figure 2
20
4
1
b
c
d
e f g h
kg lb oz g
EN