Avintage AVI97X3ZI Manual De Utilización página 40

4. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is
between 16-32°C (N class marked on the rating plate). If the ambient temperature is above or below
recommended temperatures, the performance of the unit may be affected and it may not be possible to
obtain temperature between 5-20°C/5-10°C/10-20°C.
How to set temperature

The controls of your wine cooler (the upper zone and middle zone)
1) " " button
To control this unit's power,ON/OFF.
Press and hold this button for approximately 3 seconds.
2) " " button (left)
To set the temperature of the upper chamber.
Press once the button, the temperature will increase 1°C.
3) " " button (left)
To set the temperature of the upper chamber.
Press once the button, the temperature will decrease 1°C.
4) LED display left window
Display temperature for upper zone.
5) " " indicator light
Compressor in operation display.
6) LED display right window
Display temperature for middle zone.
7) " " button (right)
To set the temperature of the middle chamber.
(Press once the button, the temperature will increase 1°C.
8) " " button (right)
To set the temperature of the middle chamber.
Press once the button, the temperature will decrease 1°C.
9) " " button
To control the inner light turn on/off.

Setting the temperature control
Each cooling compartment of the wine cooler (upper & middle) is independently controlled. To set the
temperature:

When pressing
middle compartment automatically. The LED will flashing and display the setting temperature.

Press once the button, the temperature will decrease or increase 1°C. When exceeding the minimum
or button, the system will be entering the set up mode in the upper or
40