Publicidad
Idiomas disponibles
Idiomas disponibles
Camera installation and connection
1. Install the WiFi antenna on the camera.
2. Install the micro SD card (max. 128Gb) in the camera.
3. Connect the power adapter to the camera and to a 230V outlet.
Note: We recommend that you use the power adapter included in the package
(12V/2A).
4. Connect the network cable to the RJ45 connector of the camera and to
the router.
Warnings:
•
Make sure the router is connected to the internet.
•
Check if the LAN port in the router where the camera will be connected to
has internet access. Use a laptop or PC connected to this port. Green network
indicator - means that the transmission of network data is normal.
The camera will start in AP mode when connected to the power supply only.
You can connect directly to the camera via AP mode. For additional details,
see the documentation "How to use the camera's AP mode" on the CD
included in the package.
User manual
4
Publicidad
