Publicidad
Idiomas disponibles
Idiomas disponibles
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding
as there may be accessory parts contained within the packaging material.
WARNING: Do not allow children to operate this appliance, it is NOT a toy.
Before your first use you may wash the Measuring Scoop, Lid, and
Popper cover using warm water and non-abrasive dish soap.
The Inner popper can be cleaned using a lightly damp cloth (Making
sure water does NOT enter the Hot Air Chambers).
Dry all parts thoroughly and assemble.
Using Your Hot Air Popcorn Maker:
WARNING: Avoid contact with hot surfaces.
1. Place the Motor Base on a clean, flat surface.
2. Using the Measuring Scoop provided, measure 1 scoop of Popcorn Kernels
and add them to the Hot Air Inner Popper. The Scoop provided with this
appliance is the recommended batch amount. One Scoop renders about
6-8 cups of Popcorn per batch.
CAUTION: Do not overfill the product or operate it when empty. DO NOT
add oil to the Inner Popper, Popcorn is cooked using Hot Air.
3. Place the Popper Cover and secure in place. The Measuring Scoop should
be placed on top of the Popper Cover and can serve as a Butter Warming
Tray.
NOTE: The Measuring Scoop/Butter Melting Tray must always be in place
while in operation even if you choose not to melt butter. Do not operate
the Popcorn Maker without it.
4. The Butter Melting Tray can hold up to 3 Tablespoons of soft butter or
margarine. Using cold butter/margarine is not recommended as it will
not melt during the short popping period.
5. Place a Serving Bowl under the opening of the Popping Cover.
6. Connect Plug to the nearest 120 V AC electrical outlet and Turn the
Power Switch to the "I" position to begin the popping cycle.
Attention: First use may cause a slight odor or small smoking upon
heating, it is normal. This is a result of the heating element chemical
reaction. It quickly goes away.
7. Popping times vary from 2-3 minutes from when the first kernel has
popped.
5
Publicidad
