Forch 5331 1 18 3 Manual Original página 17

Technical Data
English
Cordless rotary ham-
mer
Article number
Rated voltage
Rated speed A)
– Clockwise
– Anticlockwise
Impact rate A)
Impact energy per
stroke according to
EPTA-Proced-
ure 05:2016
Tool holder
Max. drilling diameter
– Concrete
– Steel
– Wood
Weight according to
EPTA-Proced-
ure 01:2014 B)
Recommended ambient
temperature during
charging
Permitted ambient tem-
perature during opera-
tion C) and during storage
Recommended re-
chargeable batteries
Recommended char-
gers
A) Measured at 20–25 °C with rechargeable battery
ProCORE18V 12.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Noise/Vibration Information
Noise emission values determined according
to EN IEC 62841-2-6.
Typically, the A-weighted noise level of the power
tool is: Sound pressure level 90 dB(A); sound
power level 101 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and un-
h
certainty K determined according
to EN IEC 62841-2-6:
1 609 92A 7MC • 28.11.22
Hammer drilling into concrete: a
m/s
Chiselling: a
18 V cordless
The vibration level and noise emission value given
rotary hammer
in these instructions have been measured in ac-
5331 1 18 3
cordance with a standardised measuring proced-
V= 18
ure and may be used to compare power tools.
They may also be used for a preliminary estima-
tion of vibration and noise emissions.
min -1 0–1800
The stated vibration level and noise emission
-1
min 0–1800
value represent the main applications of the power
min -1 0–5100
tool. However, if the power tool is used for other
J 2 applications, with different application tools or is
poorly maintained, the vibration level and noise
emission value may differ. This may significantly
increase the vibration and noise emissions over
the total working period.
SDS plus
To estimate vibration and noise emissions accur-
ately, the times when the tool is switched off or
mm 21
when it is running but not actually being used
mm 13
should also be taken into account. This may signi-
ficantly reduce vibration and noise emissions over
mm 30
the total working period.
kg 2.8–3.7
Implement additional safety measures to protect
the operator from the effects of vibration, such as
servicing the power tool and application tools,
°C 0 to +35
keeping their hands warm, and organising work-
flows correctly.
°C –20 to +50
Rechargeable battery
Charging the battery
GBA 18V...
ProCORE18V...
GAL 18...
u
GAX 18...
GAL 36...
Note: Lithium-ion rechargeable batteries are sup-
plied partially charged according to international
transport regulations. To ensure full rechargeable
battery capacity, fully charge the rechargeable bat-
tery before using your tool for the first time.
Inserting the Battery
English
Push the charged battery into the battery holder
until it clicks into place.
Removing the Battery
To remove the rechargeable battery, press the
battery release button and pull the battery out. Do
not use force to do this.
The rechargeable battery has two locking levels to
prevent the battery from falling out if the battery re-
2 ,
=12.7 m/s 2 , K=1.5 m/s
h
English
Use only the chargers listed in the technical
data. Only these chargers are matched to the
lithium-ion battery of your power tool.
English
=15.5 m/s 2 , K=1.5
h
2 ,
English
English
English | 17