Ultenic D5 Serie Manual Del Usuario página 10

Using Your Robot
Quick Start
Plug in the charging dock, and Put the cable into the
trunking at the bottom of charging dock.
Note: If you don't put the cable into the trunking,
it may stuck the robot while charging or cleaning.
Charging Dock Position
1) Place the charging dock on a hard, level
surface and against a wall.
2) Place the charging dock against the wall and
make sure the place is an open & uncluttered
area .
Leaving at least 2 meters (6.5 feet) in front of the
charging dock; 1 meter (2.3 feet) on both sides
of the charging dock.
3) Connect the round connector of the adapter into the power socket on the
charging dock and the other end into a wall outlet.
Note: Please make sure the indicator light is
on when the charging dock is plugged in,
otherwise the robot can not be charged.
Install Side Brushes
Attach side brushes to the bottom of robot by pressing a brush into each slot.