Publicidad
Idiomas disponibles
Idiomas disponibles
User Manual
Installation and Operation
The following graphic shows the Audio eARC Extractor connected in a typical set up, with HDMI cables
connected between the source equipment, Audio eARC Extractor and HDMI display equipment
Installation is simple, make sure that all devices are powered off, the Power LED will illuminate red
when the power supply is connected, whilst the Status LED will only illuminate green when a HDMI
signal is received, and both the source and display are switched on. Once playback commences sound
is output through all the audio out interfaces simultaneously.
Troubleshooting
No Signal – check all connection.
▪
▪
No audio – make sure the correct settings are on your source devices.
Device – make sure device supports eARC function.
▪
English
Publicidad
