Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING YOUR APPLIANCE
Temperature Control
To adjust the temperature, press and hold the LIGHT ICON on the CONTROL PANEL. Release the
button once the numbers on the display flashes. Flashing LED display is an indication that the thermostat
is ready to be adjusted.
•
TAP + to increase the temperature.
•
TAP - to decrease the temperature.
•
Display screen will show the temperature that you set.
•
You can manually turn off or turn on the light by pressing the LIGHTICON(Short press/tap only).
• NOTE
•
If the unit is unplugged, loses power; you must wait 3-5 minutes before restarting the unit.
•
If you choose to change the thermostat setting, adjust thermostat control and allow several
hours for temperature to stabilize between adjustments.
•
Large quantity of beverages will lower the cooling efficiency of the appliance.
•
Do not let the beverages touch the back of the wall to leave space for airflow and condensate
drain area clear.
Leveling Legs
•
Your appliance has two leveling legs which are located in the front bottom corners of your
appliance. After properly placing your appliance in its final position, you can level your appliance.
•
Leveling legs can be adjusted by turning them clockwise to raise your appliance or by turning them
counterclockwise to lower your appliance. The door will close easier when the leveling legs are
extended.
℉
5
Publicidad
