Publicidad
Idiomas disponibles
Idiomas disponibles
English
-
One full turn of the counterweight will provide a pressure 2.0g. In order to reach a stylus
pressure that is greater than 2.0 g keep rotating the counterweight forward.
Stereo System Connection
RCA Jacks
• The RCA Jacks of this unit are shared as both the Phono output jacks and the Line
output jacks. They are determined by the Phono/Line Switch.
• When used as a line output, the jacks output analog line-level signals and could be
connected directly with a pair of active speakers or the appropriate input of your
stereo system. When used as a Phono output, they should be connected to the
phono pre-amp or the phono input of the stereo system.
• The Red plug connects with the Right channel and the White plug connects with
the Left channel.
Note:
− If the Phono/Line switch is set at LINE position but RCA jacks connected to the stereo
system's phono input, the sound might be distorted due to input overload and could
damage your stereo system.
− If the Phono/Line switch is set at PHONO position but RCA jack connected to the stereo
system's line input, the volume will be very low due to lacking signal pre-amplification.
− RCA Jack is not designed to be connected directly to the passive/unpowered speakers
and if it does, the volume will be very low.
Spring clip speaker terminals
The spring clip speaker terminals deliver amplified, speaker-level signals as output
and should be connected with the passive speakers.
Bluetooth Operation
1. Turn the Function Knob to Bluetooth mode , you will hear an activation sound
from the unit.
2. Turn on the Bluetooth feature of your audio device, search for "Crosley C62B" and
pair.
3. Once your device is successfully paired with the unit, you will hear a short
confirmation sound from the unit.
4. Play and stream music from your device to the unit.
Note: Bluetooth version - *5.0*
7
Publicidad
