Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Check Your Surge Suppressor's Diagnostic Indicator Lights: If your surge suppressor
features diagnostic LEDs, check them prior to connecting your equipment. They will indicate
various operating conditions when the surge suppressor is plugged into a live 120V AC outlet
and the surge suppressor's power switch is on.
"PROTECTED" LED: Indicates the surge suppression components are intact and providing
complete protection against surges. If this LED does not illuminate, some of the surge
suppression components are not functioning, and the unit should be replaced.
Visit www.tripplite.com/support.
"GROUNDED" LED: Indicates wall outlet is grounded and surge protection can properly
function. If this light DOES NOT illuminate and power is present, consult a qualified
electrician to examine your outlet's wiring.
Connect Your Equipment to the Surge Suppressor's AC Outlets: Plug your equipment's
power cords (including 2-wire devices) into the surge suppressor's AC outlets. Models feature
special widely-spaced outlets to accommodate transformers without covering other outlets. DO
NOT plug in extension cords. DO NOT OVERLOAD the surge suppressor's outlets. The surge
suppressor can accommodate a total equipment load of up to 15 amps (whether plugged into a
single outlet or spread out over multiple outlets). If the load on the surge suppressor exceeds
15 amps, the circuit breaker will trip and the outlets will stop providing power. If the circuit
breaker trips, reduce the load by unplugging some devices.
USB Charging Ports: Two USB charging ports are capable of delivering up to 2.1 A total. This
will provide enough power to charge the most demanding devices, including smartphones,
tablets and MP3 players.
Note: The charging ports are controlled by the master power switch on the unit.
Lifetime Limited Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and
workmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will repair
or replace the product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or shipping the
product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th St., Chicago, IL 60609. Seller will pay return
shipping charges.
The warranties of all TRIPP LITE surge suppressors are null and void if they have been connected to the output of any UPS
system. The warranties of all TRIPP LITE UPS Systems are null and void if a surge suppressor has been connected to its output
receptacles.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR
NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO
THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY
OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY
EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied
warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which
vary from jurisdiction to jurisdiction.)
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the
use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty
as to the suitability or fitness of these devices for any specific application.
The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique
series number. The series number can be found on the product nameplate label, along with all required approval markings and
information. When requesting compliance information for this product, always refer to the series number. The series number
should not be confused with the marketing name or model number of the product.
continued
3
Publicidad
