Whittier Wood Furniture 775Wa Instrucciones De Montaje página 3

C1 x 4 H x 4
E x 8
Fig. 2
Attach a Spacer (C1) and Mounting Plate (H) to each Side Panel.
Attach a Spacer (CP) and Mounting Plate (H) to each Vertical Divider.
TO ATTACH THE MOUNTING PLATES (H) WITH SPACERS (C1) TO THE SIDE PANELS:
2. Since it may be diffi cult to see through the spacer, we recommend that you start a Screw (E)
into each punch to make the holes easier to see; remove screws and insert through the plates
and spacers. Line up Spacer (C1) and a Mounting Plate (H) with longer arm facing out (arrow
on plate points out) over the prepunched holes and fasten each set in place with two #6 x 1"
P.O. Zinc Screws (E). Repeat for each door. See Figure 2.
H x 4
CP x 4
N x 8
Fig. 3
TO ATTACH THE MOUNTING PLATES (H) WITH SPACERS (CP) TO THE VERTICAL DIVIDERS:
3. Line up a Spacer (CP) and a Mounting Plate (H) over each pair of prepunched holes in both
sides of the vertical divider and fasten in place with two #8x5/8" Pan Head Screws (N). See
Figure 3.
SIDE PANEL
C1
NOTE:
VERTICAL DIVIDER
N
N
H
H
CP
E
E
Page 3 – 775Wa – 10/13