Casanoov TANKER B250 Manual De Instrucciones página 21

Safety Instruction
1. For security, please read the user manual carefully before initial operation;
2. Please be sure the power is off before connecting, the product is produced
without fuse;
Working voltage
Loading capacity
Flicker Frequency
Working temperature
IP Level
Power input connect to PCB board terminal 12 for «+» and
13 for «-»
Working power 12V–265V DC/AC
2 SW1 switch
It's the switch for switching LED in flickering or lighting.
When SW1 at connecting, LED will flicker after power on.
When SW1 at disconnecting, LED will light after power on.
Please refer to control board chart for detailled connexion.
!
FLASH LAMP WARNING
Flash lamp specifications
12-265 VAC/DC
< 3 W
1 HZ
-20°C ~ +60°C
IP54
Flash lamp assembly
EN
21