Publicidad
Idiomas disponibles
Idiomas disponibles
EN
•
Make the surfaces wet before you clear the unwanted
material in dusty conditions.
•
Look out for children, pets, open windows, and cleaned
cars during operation.
•
Clean the machine.
•
Discard the unwanted material when you complete work.
11
MAINTENANCE
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Disconnect the plug from the power source before
maintenance.
11.1
CLEAN THE MACHINE
The machine must be dry. Humidity can cause risks of
electrical shocks.
•
Clear the unwanted material out of the air vent with a
vacuum cleaner.
•
Do not spray the air vent or put the air vent in solvents.
•
Clean the housing and the plastic components with a
moist and soft cloth.
11.2
EXAMINE EXTENSION CABLES
•
Look carefully for deterioration, cuts or cracks in the
insulation.
•
Examine the plug for damage.
•
Replace cables if defective or damaged.
12
TRANSPORTATION AND
STORAGE
Disconnect the plug from the power source before
tranportation and storage.
12.1
MOVE THE MACHINE
•
Only hold the machine with the handgrip.
12.2
STORE THE MACHINE
•
Clean the machine before storage.
CAUTION
CAUTION
WARNING
CAUTION
WARNING
English
•
Make sure that the motor is not hot when you store the
machine.
•
Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
•
Replace the damaged parts.
•
Tighten the bolts.
•
Speak to a person of an approved service center.
•
Store the machine in a dry area.
•
Make sure that children cannot come near the machine.
13
TROUBLESHOOTING
PROBLEM
The motor does
not start when
you pull the trig-
ger.
The machine does
not start.
The air does not
flow through the
tube when you
start the machine.
Cruise Control
Lever does not
work.
14
TECHNICAL DATA
Voltage
Air volume
Air speed
Weight
15
LIMITED WARRANTY
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of three (3)
8
POSSIBLE
SOLUTION
CAUSE
Connect to an out-
The unit is discon-
let or an extension
nected.
cable.
The power switch
is defective.
Replace the defec-
The motor is defec-
tive parts by an ap-
tive.
proved service
center.
The PCB board is
defective.
The air inlet or
Remove the block-
tube outlet has a
age.
blockage.
The screw is loose. Tighten the screw
with a screwdriver.
9A
530 CFM
130 MPH (209 Km/h)
5.5 lbs. (2.5 kg)
3
YEAR
ANS
AÑOS
LIMITED WARRANTY
GARANTIE LIMITÉE
GARANTÍA
LIMITADA
Publicidad
